LED Light Single Side Aluminium PCB Board With Pure White Solder Mask

• Layers: 1 L

• Material: aluminum backed board

• PCB thickness: 1.2mm ±10%

• Final copper: 1/1oz

• Minimum hole: 0.6mm

• Minimum line width/space: 8/8-mil

• Minimum hole copper: 20um

• Solder mask: white

• Surface: lmmersion Gold

• Outline: rout and score

• E-test: 100%

• Inspection standard: IPC-A-600H/IPC-6012B, class 2/3

• Outgoing reports: final inspection, first article report, E-Test, solder ability test, micro section and more

• Certificates: UL, SGS, RoHS

The advantages of using metal backed PCBs and LED PCB boards:

• Power densities can be increased whilst components are kept cool, increasing life and durability.

• Surface mount technology can remove manual assembly from the traditional heat sink, clip, sil-pad arrangement.

• Dielectrics can be tailored to suit your thermal or insulation level requirements.

• The circuits can be shaped, drilled and formed, an advantage when compared to ceramic based products.

• Cooling properties allow devices to be driven harder or de-rated for lower cost components.

Applications:

Lighting and emergency lighting

Road signs, vehicle hazard lights, DC safety lighting, spot lights, handrail lighting, beacons, floor lighting, exit lighting, marine and aircraft, cabin lighting.

What can be achieved using metal backed PCBs or LED PCB boards

• Insulated metal substrate technology utilises the printed circuit board as a key constituent in heat removal from component devices.

• The thermal efficiency gained by using an aluminium backed board allows downsizing of designs and hardware removal.

• Electrical insulation between the copper and base metal is achieved using dielectric layers with high thermal conductivity.

Process flow chart